Although the body and frame are two completely separate components they have can have a dramatic and damaging effect on each other.
Maintenance on these is fairly simple but also critical
Body to frame bolts
Standard locations for the fasteners are:
3 fasteners are under each side under the rear dinette seats (6 total)
1 fastener under the sink – if you have a furnace it has to be removed to access it
1 fastener is under the fridge, the fridge has to be removed to access it
2 fasteners are in the closet
3 fasteners are under each side in the front storage compartments (6 total)
1 additional screw is sometimes located in the middle of the kitchen floor area
I appreciate your comments
Melissa Stephens
Is there a chart or blueprint as to exactly where these fasteners are and what they look like
Ian
There is no standard locations but about half way down the page is the section on “Removing the Body from the Frame”, there I identify the common locations.
https://www.boler-camping.com/boler-modifications/boler-frame/